>>
!6IA10XIaIg 11/06/11(Sun)19:48 No. 5135432 File1320626923.jpg -(412 KB, 1024x768, 2.jpg ) This is a long ass post explaining a lot of features and work on this prop. Sorry in advance. After
less than 24 hours, my Yoko rifle is done. We worked over 12 hours
yesterday to finish this before the con this weekend, and then about 8
hours today, totaling roughly 20 hours. I swear, it's a miracle that it
came out this great. I had help with the construction, but I was
still heavily involved with the process of making this rifle! I don't
take full credit, though, my friend was gracious enough to let me use
his shop and tools. First off, the handle and magazine, as well as
the butt of the gun are made of MDF. We heated up some black plastic (my
friend informed me it was industrial-grade plastic) and bent it over
the butt of the gun and nailed it down with a nail gun. The muzzle is
also made of the same plastic, cut into 6 strips and attached to a piece
of PVC that we slid and glued (with the help of some wedges we
fashioned out of spare wood) over the barrel, also PVC, just smaller in
diameter. There's a cocking mechanism that we had to figure how to make
too. Basically, it's a piece of PVC that fits inside the other piece,
with a screw+little wooden circular cap on top (acting as the pin)
epoxied onto the inside section of PVC. There's a spring in the back to
create tension as you pull back on it. It's held closed with magnets,
because it kept sliding down and open before we put magnets inside. The
magazine clip is also removable, and I can store my ID, cash, and other
small objects inside. The barrel itself has to be screwed into place
with a Philips screwdriver. The gun is well over 6 feet tall. I'm
5'2", but my Yoko boots add 2-3 inches. I left a ton of crap out, but
I'm tired of typing. If you have any questions, feel free to ask. Sorry
for the long post, again. I'm still in the process of painting this and
adding the pink strap. I'll keep posting my progress as I paint.