Pro-49 Scanner
(200-0306)                   Operation                Faxback Doc. # 34185


STORING FREQUENCIES

You can store a frequency into each of the 10 channels.  Follow these
steps to store frequencies:

1.  Turn on your scanner by turning VOLUME clockwise.  If the scanner
    starts scanning, press MANUAL.

2.  Enter the channel number you want to store a frequency in, then press
    MANUAL.

3.  Enter the desired frequency including the decimal point.  The decimal
    point appears as a dash (-) on the display.

4.  Press E (enter) to store the frequency.  If you made a mistake in
    Step 3, E (error) appears on the display.  Press ./CLEAR and start
    from Step 3.

5.  To confirm what you just stored, press REVIEW.  The programmed
    frequency appears on the display, one digit at a time.

6.  To program more channels, repeat Steps 2 - 4.  If you want to program
    the next channel in sequence, press MANUAL then repeat Steps 3 - 4.

NOTE:  The frequencies stored in memory are protected for about 30 minutes
       without AA batteries or adapter power.

Tips for Programming

*  Good references for active frequencies are Radio Shack's "Police Call
   Radio Guide Including Fire and Emergency Services," "Official Maritime
   Frequency Directory," and "Official Aeronautical Frequency Directory."
   We update these directories every year, so be sure to get a current
   copy.

*  Frequencies in the VHF bands are in  5 kHz steps.  In the UHF bands,
   they are in 12.5 kHz steps.  The scanner automatically rounds the
   frequency to the nearest  valid number.  For example, if you try to
   enter a frequency of 151.473, your scanner rounds it to 151.475.


(IR-08/08/96)